top of page

Novice Karate Group (ages 8 & up)

公開·10名のメンバー
Eric Sysoev
Eric Sysoev

ISO 11064-5 PDF Free Download: How to Apply Ergonomic Principles for Displays and Controls in Control Centres


ISO 11064-5 PDF Free Download: Ergonomic Guidelines for Displays and Controls in Control Centres




If you are involved in the design of control centres, you may be interested in ISO 11064-5, a standard that provides ergonomic principles and recommendations for displays and controls in control-centre hardware and software. ISO 11064-5 is part of ISO 11064, a series of standards that covers various aspects of ergonomic design of control centres, such as layout, environment, lighting, and acoustics.




iso 11064-5 pdf free download



In this article, we will explain what ISO 11064-5 is, what it covers, and how you can download it for free as a PDF file. We will also provide some alternatives to ISO 11064-5 and some tips on how to apply ergonomic principles for displays and controls in control centres.


What is ISO 11064-5?




ISO 11064-5 is an international standard that was published by the International Organization for Standardization (ISO) in 2008. It is titled "Ergonomic design of control centres - Part 5: Displays and controls". It is part of ISO 11064, a series of standards that was developed by ISO/TC 159/SC 4, a technical committee that deals with ergonomics of human-system interaction.


ISO 11064-5 deals primarily with the display and input of data to monitor and/or operate processes from control centres. It establishes requirements that shall and recommendations that should be followed when designing displays and controls for control-centre hardware and software. It covers various types of displays and controls, such as visual, auditory, tactile, voice, keyboard, mouse, touch screen, joystick, etc.


ISO 11064-5 aims to ensure that displays and controls are designed in a way that supports the performance, well-being, and safety of the operators and other users of the control centre. It also aims to enhance the usability, efficiency, and effectiveness of the human-system interaction.


What does ISO 11064-5 cover?




ISO 11064-5 covers the following topics:


  • Principles: It presents general principles for the design of displays and controls in control centres, such as compatibility, consistency, flexibility, feedback, redundancy, etc.



  • Process: It describes the process for display and control specification, including the design team and competencies, the evaluation methods, and the iteration steps.



  • Alarms: It gives high-level requirements and recommendations for alarm systems in control centres, such as structuring, presentation, interaction, handling, and documentation.



  • Guidelines: It provides detailed guidelines for the design of displays and controls in control centres, such as network boundaries, page types and numbers, formats, design elements, display devices, user-interface interaction, dialogue types, system response times, control devices, coding of controls, etc.



ISO 11064-5 also includes some informative annexes that provide additional guidance on arranging displays and control workstations (Annex A) and on conformance matrix (Annex B).


How to download ISO 11064-5 PDF for free?




If you want to download ISO 11064-5 PDF for free, you have some options. Here are some of them:


Use a search engine: You can use a search engine like Google or Bing to search for keywords like "iso 11064-5 pdf free download" or "iso 11064-5 pdf". You may find some websites that offer ISO 11064-5 PDF for free download. However, these websites may not be trustworthy or safe. They may contain malicious software or viruses that can infect your computer or your devices. They may also violate the copyright or intellectual property rights of ISO or other parties. Therefore,





  • Use a library or a database: You can use a library or a database that has access to ISO standards and other publications. You may find some libraries or databases that offer ISO 11064-5 PDF for free download or for a low fee. However, these libraries or databases may have some limitations or restrictions in terms of availability, access, or usage. Therefore, you should always check the terms and conditions of the library or database before downloading the file.



  • Use an online service: You can use an online service that can convert ISO 11064-5 to PDF for free. You may find some online services that offer ISO 11064-5 PDF for free download or for a low fee. However, these online services may not be reliable or accurate. They may not convert the file correctly or completely. They may also compromise your privacy or security by storing or sharing your data. Therefore, you should always check the reputation and the policy of the online service before using it.



Therefore, you should be careful and cautious when downloading ISO 11064-5 PDF for free. You should always use a reputable and legal source and a reliable and secure method.


What are the alternatives to ISO 11064-5?




If you are looking for some alternatives to ISO 11064-5, you have some options. Here are some of them:


  • Use other standards: You can use other standards that provide ergonomic guidelines for displays and controls in control centres. Some examples of other standards are ANSI/HFES 100-2007 Human Factors Engineering of Computer Workstations, IEC 60073 Basic and safety principles for man-machine interface, marking and identification - Coding principles for indicators and actuators, IEC 60964 Nuclear power plants - Control rooms - Design, IEC 61227 Nuclear power plants - Control rooms - Operator controls, IEC 61243 Live working - Voltage detectors - Part 1: Capacitive type to be used for voltages exceeding 1 kV a.c., etc.



  • Use other sources: You can use other sources that provide ergonomic information or advice for displays and controls in control centres. Some examples of other sources are books, journals, articles, websites, blogs, podcasts, videos, etc. However, these sources may not be authoritative or comprehensive. They may also be outdated or biased. Therefore, you should always verify the source and the quality of the information or advice before using it.



  • Use your own judgment: You can use your own judgment and experience to design displays and controls in control centres. You can apply ergonomic principles and best practices that you have learned or observed from other sources or situations. You can also consult with other experts or users who have knowledge or experience in designing displays and controls in control centres. However, using your own judgment may not be sufficient or appropriate. You may overlook some important factors or aspects that are specific to your context or project. You may also make some errors or mistakes that could affect the performance, well-being, and safety of the operators and other users of the control centre. Therefore, you should always check your design against ISO 11064-5 or other standards to ensure its quality and validity.



How to apply ergonomic principles for displays and controls in control centres?




If you want to apply ergonomic principles for displays and controls in control centres, you need to follow these steps:


  • Analyze the context: You need to analyze the context of your project, such as the goals, objectives, requirements, constraints, stakeholders, users, tasks, processes, functions, data, etc.



Select the displays and controls: You need to select the types and numbers of displays and controls that are suitable for your project, such as visual, auditory, tactile, voice, keyboard, mouse, touch screen, joystick





  • Design the displays and controls: You need to design the layout, dimensions, formats, elements, devices, dialogues, response times, coding, etc. of the displays and controls according to the principles and guidelines of ISO 11064-5.



  • Evaluate the displays and controls: You need to evaluate the usability, efficiency, effectiveness, satisfaction, and safety of the displays and controls using various methods, such as user testing, expert review, simulation, etc.



  • Iterate the displays and controls: You need to iterate the design and evaluation of the displays and controls until you achieve the desired results and meet the requirements and expectations of the stakeholders and users.



By following these steps, you can apply ergonomic principles for displays and controls in control centres according to ISO 11064-5.


Conclusion




ISO 11064-5 is a standard that provides ergonomic principles and recommendations for displays and controls in control-centre hardware and software. It aims to enhance the performance, well-being, and safety of the operators and other users of the control centre. It covers various topics, such as principles, process, alarms, guidelines, etc.


If you want to download ISO 11064-5 PDF for free, you have some options. However, you should be careful and cautious when downloading it from untrustworthy or illegal sources. You should always use a reputable and legal source and a reliable and secure method.


If you are looking for some alternatives to ISO 11064-5, you have some options. However, you should always verify the source and the quality of the information or advice before using it. You should also check your design against ISO 11064-5 or other standards to ensure its quality and validity.


If you want to apply ergonomic principles for displays and controls in control centres, you need to follow some steps. You need to analyze the context, select the displays and controls, design the displays and controls, evaluate the displays and controls, and iterate the displays and controls according to ISO 11064-5.


We hope this article has helped you understand what ISO 11064-5 is and how to download it for free as a PDF file. We also hope it has provided you with some alternatives to ISO 11064-5 and some tips on how to apply ergonomic principles for displays and controls in control centres.


Conclusion




ISO 11064-5 is a standard that provides ergonomic principles and recommendations for displays and controls in control-centre hardware and software. It aims to enhance the performance, well-being, and safety of the operators and other users of the control centre. It covers various topics, such as principles, process, alarms, guidelines, etc.


If you want to download ISO 11064-5 PDF for free, you have some options. However, you should be careful and cautious when downloading it from untrustworthy or illegal sources. You should always use a reputable and legal source and a reliable and secure method.


If you are looking for some alternatives to ISO 11064-5, you have some options. However, you should always verify the source and the quality of the information or advice before using it. You should also check your design against ISO 11064-5 or other standards to ensure its quality and validity.


If you want to apply ergonomic principles for displays and controls in control centres, you need to follow some steps. You need to analyze the context, select the displays and controls, design the displays and controls, evaluate the displays and controls, and iterate the displays and controls according to ISO 11064-5.


We hope this article has helped you understand what ISO 11064-5 is and how to download it for free as a PDF file. We also hope it has provided you with some alternatives to ISO 11064-5 and some tips on how to apply ergonomic principles for displays and controls in control centres. ca3e7ad8fd


グループについて

Welcome to the group! You can connect with other members, ge...

メンバー

  • Salinda Perera
    Salinda Perera
  • Lucas Morris
    Lucas Morris
  • Fedor Shcherbakov
    Fedor Shcherbakov
  • Everett Jones
    Everett Jones
bottom of page